Sale!

FastenMaster Cortex For Boral Trim - 750 Linear Feet

FastenMaster Cortex For Boral Trim - 750 Linear Feet - Image 2

FastenMaster Cortex For Boral Trim - 750 Linear Feet - Image 3

FastenMaster Cortex For Boral Trim - 750 Linear Feet - Image 4

FastenMaster Cortex For Boral Trim - 750 Linear Feet - Image 5

FastenMaster Cortex For Boral Trim - 750 Linear Feet -ANTONY SHOP Sales FMRCTTB1125 BoralTruExteriorGrain2 20

FastenMaster Cortex For Boral Trim - 750 Linear Feet -ANTONY SHOP Sales FMRCTTB1125 BoralTruExteriorSmooth234 50

FastenMaster Cortex For Boral Trim – 750 Linear Feet

Original price was: $386.97.Current price is: $98.99.

Compatible with Boral Trim
Box of 1125 screws, 1200 plugs, and setting tool
Plugs are made from manufacturer OEM trim boards, ensuring plugs match the trim
Trim fasteners conceal the heads of the fasteners when installing trim boards
TORX(R) ttap(R) Drive System
Traditional plugs are smooth
Frontier plugs are wood grain

Select a Color

Select a Screw Length

Clear

SKU: ZGL5A 1698634553 Categories: Deck Products, Screws & Fasteners Tag: FastenMaster

Your needs, our top priority.
Online assistance, always at your service.
Prompt service, every time.
Protect Your Wallet with Safe Payments

The FastenMaster Cortex for Boral Trim – 750 Linear Feet is a fast and easy way to conceal fasteners and screw heads when installing PVC trim Boards. Cortex is easy-to-use and includes everything needed, including (1125) screws, (1200) plugs, and a setting tool. FastenMaster recommends installing with an 18-volt cordless impact drill. The Cortex for Trim Fastening System is designed for use with PVC Trim with an actual thickness of 5/8″ to 5/4″.

How many fasteners are needed? Horizontal trim boards less than 12″ wide, use two Cortex fasteners at every framing member-rafter tail or wall stud. The screws should be 16″ OC or closer. Vertical trim boards (i.e., next to a door or a window), use two Cortex fasteners every 16″ OC or closer. If a trim board is 12″ or wider, use three screws. Each trim board must be fastened within two inches of the end of each board. Note: Predrilling is not required throughout the majority of the project. Predrilling is required when fastening within 1/2″ of the end of a board and at mitered joints. Use a 3/16″ drill bit for predrilled pilot holes.